Product Description
Advanced BioMatrix offers PhotoHA®, a methacrylated hyaluronic acid (HAMA) for photocrosslinkable hydrogels. These hydrogels provide native-like 3D HA gels with the unique attributes to be prepared at various concentrations and photocrosslinked to provide various gel stiffness. This PhotoHA® product only contains the methacrylated hyaluronic acid. For the entire photocrosslinking kit, please visit a PhotoHA® kit page.
| Item | Catalog Number | Package Size | Storage Temperature |
| Methacrylated Hyaluronic Acid | #5212 | 100 mg | -20°C |
Hyaluronic acid is the most abundant glycosaminoglycan in the body being an important component of several tissues throughout the body. While it is abundant in extracellular matrices, hyaluronic acid also contributes to tissue hydrodynamics, movement and proliferation of cells, and participates in a number of cell surface receptor interactions.
For the majority of cell types, it is recommended to add additional ECM proteins to the hyaluronic acid hydrogels. The proteins provide important cell binding sites.
Once solubilized, the PhotoHA®can be stored at 2-10°C for 1 month.
| Parameter, Testing, and Method | MethacrylatedHyaluronic Acid #5212 |
| Sterilization Method | Filtration |
| Sterility - USP modified | No growth |
| Form | Lyophilized Powder |
| Package Size | 100 mg |
| Storage Temperature | -20°C |
| Shelf Life | Minimum of 6 months from date of receipt |
| Shelf Life After Reconstitution | 1 Month |
| Degree of Methacrylation | 45-65% |
| Molecular Weight | 100-150 kDa |
NMR Analysis | Characteristic |
Hydrogel Young's Modulus E (Pa) | Characteristic |
Swelling Characteristics of PhotoHA®:
50 μL hydrogels fabricated in 4.7 mm diameter molds were imaged before and after incubation in phosphate buffered saline at 25°C for 24 hours. The diameter of hydrogels were quantified using ImageJ software. Statistical comparisons between groups (n=3) were performed via one-way ANOVA with post hoc testing and significance determined atp < 0.05.
Compressive Modulus of PhotoHA®:
Dynamic mechanical analysis (Q800, TA Instruments) was performed on 50 μL hydrogels fabricated in 4.7 mm diameter molds. Hydrogels were secured within a fluid cup via a 0.01 N pre-load and compressed to 30% strain at a rate of 0.5 N min-1. The Young’s modulus of each hydrogel was calculated as the slope of generated stress-strain curves between 10% and 20% strain. Statistical comparison between MeHA concentrations (n=3) was performed via Students t-test with two-tailed criteria and significance determined atp < 0.05.
Reaction Behaviorof PhotoHA®:
Rheological time sweeps (AR2000 stress controlled rheometer, TA Instruments; 0.5% strain, 1 Hz, 25°C) of MeHA crosslinking with exposure to UV light (=320-390 nm) and in the presence of 0.05 wt% Irgacure 2959 (I2959). After 1 minute, the macromer solution (i.e. MeHA and I2959) was exposed to UV light, resulting in the plateau of moduli before 5 minutes.
Directions for Use
Download the full PDF versionor continue reading below:
3D Hydrogel Preparation:
Note: Employ aseptic practices to maintain the sterility of the product throughout the preparation and handling of the collagen and other solutions.
Recommended concentrations are 5-30 mg/ml(0.5-3.0%).
Note: The following recommended instructions are for a 1% hyaluronic acid (HA) methacrylate solution. Adjustments to this protocol may be required for various concentrations.
- Add 10 ml of 1X phosphate buffer saline (PBS), water or cell culture media to the 100 mg of lyophilized methacrylated HA powder.
- Mix on a shaker table or rotator plate until fully solubilized (~30 to 60 minutes) at 2-10°C.Note: Solubilization times may vary depending on the desired concentration and volume of PBS, water or medium added,
- To solubilize the photoinitiator, add 1 mL of neat methanol to the vial of photoinitiator containing 100 mg of Irgacure and vortex. This makes a 10% solution.Note: The photoinitiator in solution has a shelf life of 2 weeks. Only dissolve required amount of photoinitiator required. Store remaining photoinitiator (powder or solution) at 2 to 10°C.
- Calculate the volume of the photoinitiator required by multiplying the total volume of HA methacrylate required by 0.01. For example, if you making 10 ml of HA methacrylate, the calculated volume of the photoinitiator to add is 100 µ
- Add the calculated volume of photoinitiator to the required volume of HA methacrylate solution and mix thoroughly.
- Add your cells to the HA methacrylate /photoinitiator solution.
- Dispense your HA methacrylate /photoinitiator/cell solution into the desired cultureware (i.e. 6-well plate, 48-well plate).
- For UV-crosslinking, place the hydrogel printed structure directly under a 365 nm UV light crosslinking source.Note: Longer exposure allows more crosslinking, though each cell type withstands different degrees of UV light and free radical exposure (generated by the photoinitiator) that mediates crosslinking
Product Q & A
Yes. There are quite a few publications citing various hyaluronidase protocols for digesting PhotoHA hydrogels. Here are a few:
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5460858/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4840832/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4986518/
The HA we usecomes frombiotechnological production, where the hyaluronic acid is extracted from the cell walls of the bacteria Streptococcus zooepidemicus.
Product Cell Assay
Human mesenchymal stem cells (20 x 106 / mL) were encapsulated in 50 μL hydrogels (~ 4.7 mm x 2 mm). Hydrogels (1 wt% PhotoHA®) were fabricated with 0.05 wt% Irgacure 2959 and exposure to 2 mW/cm2 light (320-390 nm) for 10 minutes. After 24 hours, encapsulated cells were stained with calcein AM and ethidium homodimer and subsequently imaged on a Leica SP5 confocal microscope (using FITC/TRITC sequential scans).
Product Applications
PhotoHA® Methacrylated Hyaluronic acid can be used to form hydrogels for ex-vivo engineering of autologous cartilage tissue[1] or as a mesenchymal stem cell carrier in cartilage repair[2].
Because the stiffness can be widely adjusted by altering concentration or UV-light exposure, methacrylated HA has been used to measure the effects of matrix stiffness on cell phenotype and function[3][4].
Methacrylated HA can be used for 3D bioprinting (extrusion[5], inkjet[5] and photolithographic[6]) to create structures that promote osteogenic differentiation of MSC’s[7].
The high tunability of hyaluronic acid methacrylate allows it to be mixed with, and reinforce other types of hydrogels (such as collagen, or gelatin methacrylate)[8].
References:
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5717235/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5627486/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5541838/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5447944/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5615317/
https://www.ncbi.nlm.nih.gov/pubmed/21773726/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5460858/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5748291/
Product References
References for PhotoHA®:
Khetan, Sudhir, and Owen Corey. "Maintenance of stem cell viability and differentiation potential following cryopreservation within 3-dimensional hyaluronic acid hydrogels."Cryobiology(2019).
Poldervaart, M. T.et al.3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity.Plos One12,(2017).
Product Certificate of Analysis
Safety and Documentation
Satefy Data Sheet
Certificate of Origin
Product Disclaimer
This product is for R&D use only and is not intended for human or other uses. Please consult the Material Safety Data Sheet for information regarding hazards and safe handling practices.
Advanced BioMatrix（简称ABM）是美国一家著名的生物公司，获得了Allergan Inc的授权(Allergan用25年时间不断完善胶原蛋白相关的产品的生产工艺)，将Allergan的专业和技术用于蛋白生产与检测，致力于为组织工程、细胞分析及细胞增殖等研究领域提供优质稳定的产品。
Advanced BioMatrix不断丰富已有产品线，目前可为三维细胞培养提供各种胶原蛋白、纤连蛋白、玻连蛋白、水性凝胶、不同粘度与分子量的透明质酸以及低代成纤维细胞等。在美国全部产品授权Sigma销售。
Advanced BioMatrix是组织培养，细胞分析和细胞增殖三维（3D）应用的生命科学领域的领导者。 我们的产品被公认为纯度，功能性和一致性的标准。
我们在生产，分离，纯化，冷冻干燥，细胞培养和蛋白质测试，粘附肽，附着因子，底物刚性和其他3D矩阵产品方面拥有丰富的专业知识。 我们的专业技术和知识正在被用来确保我们的产品质量最高，批次之间一致且易于为我们的研究客户使用。
本网站将在规定时间内给予删除等相关处理。
