Product Description
CytoForm®-100 consists of six (6) 3D printed calcium phosphate scaffolds in a 12-well plate. Each layer is rotated by 45° for optimal cell seeding efficiency. The scaffolds consist of synthetic calcium phosphates, mainly alpha-tricalcium phosphate and nanocrystalline, calcium deficient hydroxyapatite. These scaffolds provide interconnected porosity (for vascularization), high bioactivity, easy handling, workability and high mechanical stability. These features make the substrates ideal for cell culture in bone and hard tissue regeneration.
The CytoForm®-100 scaffolds are sterilized by gamma irradiation and are ready to use with no pre-treatment necessary. CytoForm®-100 is chemically stable in neutral or alkaline pH and has high compressive/mechanical strength.
Scaffolds can be seeded directly with cells. Cells can also be suspended in a pre-hydrogel material (such as Type I collagen).
| Parameter, Testing, and Method | CytoForm®-100#5233 |
| Compressive Strength | 5 MPa |
| Sterilization method | Irradiation |
| Diameter | 20 mm |
| Height | 5 mm |
| Number of Layers | 20 |
| Strand Diameter | ~330 um |
| Spacing | ~720 um |
| Strand Gap | ~390 um |
| Design Porosity | 80% |
| Scaffolds/Plate | 6 scaffolds |
| Shelf Life | Minimum of 6 months from date of receipt |
Directions for Use
Download the full PDF versionor continue reading below:
Cell Seeding Instructions
- Fill each well containing a scaffold with 3.5 mL of cell culture medium (approximately half the well volume) one day prior to seeding to wet the scaffold. Incubate at 37°C.
- After incubation, aspirate off the cell culture medium.
- Add cells the next day by dispensing on top of the scaffold and allow cells to attach for 30-60 minutes.
- Fill the well with cell culture medium until the scaffold is completely covered.
Note: The type of medium used and exact cell numbers depend on the cell type. As a reference, we recommend ~5.0 x 104to 1.0 x 105human bone marrow stromal cells per scaffold.
Cell Seeding Instructions Using Collagen Hydrogel
- Fill each well containing a scaffold with 3.5 mL of cell culture medium (approximately half the well volume) one day prior to seeding to wet the scaffold. Incubate at 37°C.
- After incubation, aspirate off the cell culture medium.
- Add cells to a neutralized collagen solution (such asPureCol®EZ Gel).
Note: The type of medium used and exact cell numbers depend on the cell type. As a reference, we recommend ~5.0 x 104to 1.0 x 105human bone marrow stromal cells per scaffold.
- Slowly dispense the collagen/cell solution over the scaffold and allow the solution to fully permeate throughout the scaffold.
- Allow collagen to polymerize within the scaffold for 60-90 minutes at 37°C.
- Fill the well with cell culture medium until the scaffold is completely covered.
Product Certificate of Analysis
Product Videos
PureCol® EZ Gel - Easy 3D Collagen Gels
Video
See More
Product Disclaimer
This product is for R&D use only and is not intended for human or other uses. Please consult the Material Safety Data Sheet for information regarding hazards and safe handling practices.
Advanced BioMatrix（简称ABM）是美国一家著名的生物公司，获得了Allergan Inc的授权(Allergan用25年时间不断完善胶原蛋白相关的产品的生产工艺)，将Allergan的专业和技术用于蛋白生产与检测，致力于为组织工程、细胞分析及细胞增殖等研究领域提供优质稳定的产品。
Advanced BioMatrix不断丰富已有产品线，目前可为三维细胞培养提供各种胶原蛋白、纤连蛋白、玻连蛋白、水性凝胶、不同粘度与分子量的透明质酸以及低代成纤维细胞等。在美国全部产品授权Sigma销售。
Advanced BioMatrix是组织培养，细胞分析和细胞增殖三维（3D）应用的生命科学领域的领导者。 我们的产品被公认为纯度，功能性和一致性的标准。
我们在生产，分离，纯化，冷冻干燥，细胞培养和蛋白质测试，粘附肽，附着因子，底物刚性和其他3D矩阵产品方面拥有丰富的专业知识。 我们的专业技术和知识正在被用来确保我们的产品质量最高，批次之间一致且易于为我们的研究客户使用。
本网站将在规定时间内给予删除等相关处理。
